Color mode for image

Select the desired color mode from [Color Mode] in the [Main] sheet.

Scanning resolution

Select the desired resolution from [Resolution] in the [Main] sheet.

Size of originals to be scanned

Select the desired size from [Original Size] in the [Main] sheet.

Scan originals of undefined paper size

Select [Custom] from [Original Size] in the [Main] sheet.

Adjust density

Select [Manual] from [Density Adjustment] in the [Main] sheet → move the [Density] slider to adjust the value.

Create color negative image

Select [On] from [Reversed Image] in the [Options] sheet.

Mirror image left to right

Select [On] from [Mirror Image] in the [Options] sheet.

Rotate image

Select the desired angle of rotation from [Image Rotation] in the [Options] sheet.

Setting the brightness, contrast, and gamma for full color scanning (only for Color Network ScanGear)

In the [Options] sheet, select the color that you want to set from [Channel] → move the [Brightness], [Contrast], and [Gamma] sliders to adjust the settings.

Setting the brightness, contrast, and gamma for grayscale scanning (only for Color Network ScanGear)

In the [Options] sheet, move the [Brightness], [Contrast], and [Gamma] sliders to adjust the settings.

Scan originals from feeder with correct orientation

Select [Auto-adjust Orientation] in the [Main] sheet.
- or -
Perform the following steps:
1.In the [Main] sheet, click [Orientation] to display the [Orientation] dialog box.
2.Select the feeding direction of originals (and Book Opening direction for 2-sided originals) in the dialog box.

Set the number of pages to scan

In the [Main] sheet, select [Specify] from [Pages to Scan] → enter the number of pages.

Scan different sized originals as one operation (defined paper sizes)

Perform the following steps:
1.In the [Main] sheet, select [Different Sizes] from [Original Size] to display the [Different Sizes] dialog box.
2.Specify the combination of original sizes in the dialog box.

Scan different sized originals as one operation (undefined paper sizes)

Select [Custom] from [Original Size] in the [Main] sheet.

Verify the Department ID Management settings

Select the scanner in ScanGear Tool, and then confirm that [Enabled] is displayed for [Dept. ID Management] under [Selected Scanner].Once the scanner is selected, you can verify the scanner information in the [Scanner Info] sheet.

Save a department ID and PIN

Perform the following steps:
1.Open the [Department ID Settings] dialog box from ScanGear Tool.
2.In the dialog box, select [Save PIN] → enter values in [Department ID] and [PIN].