Send/Fax > Using the Main Unit to Send/Receive > Selecting the Telephone Line Type for an Additional Line
*
Selecting the Telephone Line Type for an Additional Line

Set the type of additional telephone line that is connected to the machine.

If this setting is incorrect, you will be unable to communicate with other machines. Be sure to check the type of telephone line that you are using, and make the correct setting.

Remark
  • This mode is available only if the optional Super G3 2nd Line FAX Board or Super G3 2nd/3rd Line FAX Board is installed.

  1. Press (Additional Functions) → [Communications Settings] → [Line Options] under <Fax Settings>.
  1. Select [Line 2] and/or [Line 3] → press [Tel Line Type]

Depending on the line, the following conditions must be met:

Line 2: The optional Super G3 2nd Line FAX Board or Super G3 2nd/3rd Line FAX Board is installed in addition to installing the optional Super G3 FAX Board

Line 3: The optional Super G3 2nd/3rd Line FAX Board is installed in addition to installing the optional Super G3 FAX Board
  1. Select the type of telephone line → press [OK].

If you do not know the telephone line type, call your telephone service provider for details.

  • Back To Top