Follow the procedure below to enter pauses with international fax numbers.

1. Place your originals → press [New Address] → [Fax].

2. Enter the international fax number → press [Pause].

Example:

International Dialing Code: 010

Country code: 1

Area code: 516

Fax number: XXX-XXXX

[Pause]: Enter the pause time equivalent in length to the time required for the dial tone to be heard after dialing is completed.

[Backspace]: Press when a wrong number is entered. The number immediately to the left of the cursor is deleted, enabling you to enter the correct number.

• The pause time differs in length, depending on whether it is entered in the middle or end of a fax number.

• The pause time entered in the middle of a fax number (lower-case p) is set to four seconds long by default. This length can be changed to any number between 1 and 15 seconds.(See "Pause Time.")

• The pause time entered at the end of a fax number (upper-case P) is set to 10 seconds long. (This length cannot be changed.)

• Two or more pauses can be entered consecutively.

• The location of a pause and the actual pause time may differ depending on the telephone system. Contact your local authorized Canon dealer or your local telephone company for further details.

3. Press [OK].

The specified destination appears in the destination list on the Send Basic Features screen.

• Back To Top