Send/Fax > Using the Main Unit to Send/Receive > Scan Settings > Changing the Zoom Ratio
*
Changing the Zoom Ratio

You can set the machine to adjust the zoom ratio automatically, or you can specify the zoom ratio manually before scanning the original.

Remark
  • If you are scanning an original larger than A3, the original image may be cut off slightly in printing.
  • The maximum size of an image that you can send at 600 x 600 dpi resolution is A3. If the image exceeds this size, it may be cut off.
  • If [PDF (Trace)], [PDF (Compact)], or [XPS (Compact)] is selected as the file format, documents can be sent only at a zoom ratio of 100%.
  • If [Long Strip Original] is selected as the document size, documents can be sent only at a zoom ratio of 100%.
  • If color mode is set to [Auto-Color Select], [Full Color], or [Grayscale], documents can be sent only at a ratio of 100%. However, if only a fax number or an I-fax address is specified as the destination, the zoom ratio can be changed regardless of the color mode settings.
  • To cancel the scan settings, press [Cancel] on the Scan Settings screen.

  • Back To Top