|
- The Different Size Originals mode cannot be used with the Document Size Select (Other
Size or Long Strip Original), 2-Page Separation, Original Frame Erase, or Book Frame Erase mode.
- The Different Size Originals mode cannot be used when sending a fax document in the
Direct Sending or Manual Sending mode.
- If Document Size Select setting is set to anything other than [Auto], all of the originals are scanned in the specified size. If you want to scan the originals in their original sizes, make sure to set Document Size Select to [Auto].
- If the originals are placed in the feeder, make sure that the different size originals are of the same weight (paper type).
- Align the top edge of the originals with the back edge of the feeder if you are placing
originals with different widths. ("Width" refers to the vertical measurement of the paper from the front of the machine to the back of the machine when the paper is placed in the feeder or on the platen glass.)
|
|
|
|
- If you send different sized originals via fax, the paper size used to output the faxes on the
recipient's machine is the size of the largest document you sent. For example, if you send an A4 and A3 original via fax, they will both be output on A3 paper at the recipient's machine.
- Set different size originals with different widths in the following combinations. Other
combinations may damage the originals.
- A3 and B4, B4 and A4R, A4 and B5, B5 and A5
- If you place originals with different widths into the feeder, the originals may move slightly when fed to the platen glass. As a result, the images may be scanned as slanted.
- If the Different Size Originals mode is set, the scanning speed may be slower than
normal.
- To cancel this setting, press [Diff. Size Originals] → [Cancel].
|
|
(Start).