The following procedure describes how to perform printing with WSD when using Windows Vista.

If a dialog box is displayed while you are performing this procedure, enter a user name and password. For more information, see the documentation provided with Windows Vista.

1. Check the settings for <RX/Print Range> in [IP Address Range Settings] on the IPv4 Settings screen to see whether the IPv4 address of the computer in which a driver is to be installed is permitted. For details, see step 8 in "TCP/IPv4 Settings."

• If the settings for <RX/Print Range> in [IP Address Range Settings] on the IPv4 Settings screen do not permit the IPv4 address, you cannot install a driver.

• If the IPv4 address of the computer is beyond the range of the permitted IPv4 addresses set for <RX/Print Range> after installing a driver, you cannot print or send a fax from the computer.

2. Install the driver.

• Using Windows Explorer:

• Using the Add Printer Wizard:

• Using Windows Explorer:

• With Windows Explorer, right-click the printer icon you want to use → select [Install].

• Using the Add Printer Wizard:

• Start the Add Printer Wizard → select a network printer.

• Back To Top