If you want to enter values in inches in all modes, which require a numeric entry, set Inch Entry to 'On' in Common Settings (from the Additional Functions screen). (See "Additional Functions.") This enables you to enter values in inches when you press [Inch] on a screen requiring a numeric entry or measurement.

The following example shows you how to enter 1 1/2" for Original Size in the Zoom Program mode.

1. Press [1] → [_] → [1] → [/] → [2] using the numeric keys on the touch panel display.

• If you make a mistake when entering values, press [C] on the touch panel display → enter the correct values.

• You can enter only 2, 4, 8, or 16 as the denominator.

• The value entered in inches is converted to millimeters by the machine each time it is entered. Thus, there may be a slight difference between the value calculated and the actual value entered.

• To enter values in millimeters, press [mm].

• Back To Top