Additional Functions > Adjusting the Machine > Automatic Feeder Cleaning
*
Automatic Feeder Cleaning

If your originals have black streaks or appear dirty after scanning them through the feeder, clean the rollers of the feeder.

Remark
  • [Feeder Cleaning] appears only if the optional Feeder (DADF-U1) is attached.
  • It takes approximately 20 seconds to clean the feeder.

  1. Press (Additional Functions) → [Adjustment/Cleaning] → [Feeder Cleaning].
  1. Place 10 sheets of blank paper into the feeder → press [Start].

Make sure that you fan the sheets of paper well.

Use A4 paper (60 to 80 g/m2).

When cleaning is complete, try scanning again.

  • To cancel feeder cleaning while it is in progress, press [Cancel].

  • Back To Top