AppleTalk Network Setup Procedures - Canon imageRUNNER ADVANCE 6075/6065/6055 e-Manual

AppleTalk Network Setup Procedures

To print via an AppleTalk network, it is necessary to perform the following procedures.

1.	Macintosh Network Settings	To specify AppleTalk network settings, enable AppleTalk according to the instructions in the documentation provided with your Macintosh.
2.	Protocol Settings (See "Protocol Settings.")	Specify the protocol settings. To specify the settings, use: The machine's control panel The Remote UI (via a web browser) Canon utilities
3.	Macintosh Print Settings (See "Setting Up a Computer for Printing.")	Specify the settings for each computer you use for printing.

IMPORTANT
Depending on the machine you are using, you may have to use optional equipment to print via an AppleTalk network. For the equipment needed, see "Optional Equipment and System Requirements." It is recommended that the network administrator perform step 2. If you are using the imagePASS, see the manual provided with the imagePASS. If you are using the imagePASS, some functions are not available with this machine. For details, see the manual provided with the imagePASS.

IMPORTANT

Depending on the machine you are using, you may have to use optional equipment to print via an AppleTalk network. For the equipment needed, see "Optional Equipment and System Requirements."

It is recommended that the network administrator perform step 2.

If you are using the imagePASS, see the manual provided with the imagePASS.

If you are using the imagePASS, some functions are not available with this machine. For details, see the manual provided with the imagePASS.